SYSTEM REQUIREMENTS
Active@ Password Changer 3.0
Active@ Password Changer 3.0 (DOS-based Version) runs on the following hardware:
- AT compatible CPU with 386 or greater processor
- 640 Kb of RAM
- 1.44 Mb floppy disk drive or CD-ROM drive
- EGA 640x480 or better screen resolution
Active@ Password Changer 3.5
Active@ Password Changer 3.5 (Windows-based Version) has the following requirements:
- operational system Windows NT and newer;
- VGA, or higher resolution, monitor;
- x86 or x64-based microprocessors (such as Intel 80486 or higher);
- minimum 16Mb of RAM;
- CD(or DVD)-ROM drive;
- Mouse or other pointing device;
Windows PE 2.0 for Windows Vista
Windows PE 2.0 for Windows Vista sysem requirements:
- x86, x64, or iA64 -based microprocessors;
- minimum of 256 MB of RAM;
- CD(or DVD)-ROM drive;
- Video Electronics Standards Association (VESA)-compatible display device and will use the highest screen resolution it can determine is supported. If Windows PE can't detect video settings, it uses a resolution of 640 × 480 pixels;
The software can display and change the password and account
settings that are:
- Created by Windows NT, Windows 2000
Workstation, Windows 2000 Server, Windows XP (32 and 64
bit), or Windows 2003 (32 and 64 bit), Windows VISTA.
- Stored on FAT16 / FAT32 / NTFS / NTFS5
file systems
Previous
< Contents >
Next |
